CNH RowGuide

corn · 06-14-2011, 12:00 PM

Does CNH's row guide work very well. What is anyones experience with it. Looking to put on 7010.

midwest · 06-19-2011, 06:48 AM

What size head? Is the combine autosteer ready? Headsight Company makes a feeler system call Truesight for corn heads, system works pretty good.

corn · 06-20-2011, 10:20 AM

7010. Full CNH auto steer ready. Probably an 8 row head. Still pending that decision but run 16 row so most likely an 8 row.

midwest · 06-20-2011, 11:00 PM

The Truesight ties in pretty slick with the CIH auto steer. It does not use the Pro600 or GPS at all, totally a feeler system.
I don't personally know anyone who runs the CIH steering system
Maybe farmertony on the CIH page does?

nsf · 09-08-2011, 03:04 PM

Had it on our 8120pic last year. Didn't work very good. Took it off and got our money back.

_Muddy · 09-08-2011, 05:25 PM

CNH row guide is a product of Trimble and uses the Claas corn head row sensors to nudge the steering as it feels its way down the row. It works very well. However, don't expect much out of any row guidance system beyond a 60-70 degree curve (snouts will bisect the curve).

stehnob · 10-20-2011, 09:05 AM

had it on a 7120 and it sucked, took it off within 3 days and took it back.

geringhoff · 10-23-2011, 12:41 PM

I just put it on my 8120 '2011 model and "2010 model 12 row folding geringhoff so far works really well i have to set an offset in the monitor tends to run a tiny bit to the left of the rows so it should fix it. Waiting to get back on the fields to try it out will let u know.

danbits · 10-27-2011, 04:50 PM

Mine always veers to the right when activated. When it finally straightens out it is ok. It leans stalks over too far and takes to long to straighten out, maybe 50 feet or so. Have tried changing aggressivness and other settings, but nothing helps. No solution yet. Any suggestions would be appreciated.

farmerjones · 10-28-2011, 12:40 AM

If you don't like the CNH you can always use the Deere universal one maybe....I have great luck with it.

06-14-2011, 12:00 PM	#1 (permalink)
corn Junior Member Join Date: May 2011 Location: SD Posts: 19	CNH RowGuide Does CNH's row guide work very well. What is anyones experience with it. Looking to put on 7010.

06-19-2011, 06:48 AM	#2 (permalink)
midwest Senior Member Join Date: Dec 2005 Posts: 611	What size head? Is the combine autosteer ready? Headsight Company makes a feeler system call Truesight for corn heads, system works pretty good.

06-20-2011, 10:20 AM	#3 (permalink)
corn Junior Member Join Date: May 2011 Location: SD Posts: 19	7010. Full CNH auto steer ready. Probably an 8 row head. Still pending that decision but run 16 row so most likely an 8 row.

06-20-2011, 11:00 PM	#4 (permalink)
midwest Senior Member Join Date: Dec 2005 Posts: 611	The Truesight ties in pretty slick with the CIH auto steer. It does not use the Pro600 or GPS at all, totally a feeler system. I don't personally know anyone who runs the CIH steering system Maybe farmertony on the CIH page does?

09-08-2011, 03:04 PM	#5 (permalink)
nsf Junior Member Join Date: Sep 2011 Posts: 1	Had it on our 8120pic last year. Didn't work very good. Took it off and got our money back.

09-08-2011, 05:25 PM	#6 (permalink)
_Muddy Senior Member Join Date: Dec 2010 Posts: 103	CNH row guide is a product of Trimble and uses the Claas corn head row sensors to nudge the steering as it feels its way down the row. It works very well. However, don't expect much out of any row guidance system beyond a 60-70 degree curve (snouts will bisect the curve).

10-20-2011, 09:05 AM	#7 (permalink)
stehnob Junior Member Join Date: Sep 2011 Posts: 10	had it on a 7120 and it sucked, took it off within 3 days and took it back.

10-23-2011, 12:41 PM	#8 (permalink)
geringhoff Member Join Date: Nov 2010 Posts: 57	I just put it on my 8120 '2011 model and "2010 model 12 row folding geringhoff so far works really well i have to set an offset in the monitor tends to run a tiny bit to the left of the rows so it should fix it. Waiting to get back on the fields to try it out will let u know.

10-27-2011, 04:50 PM	#9 (permalink)
danbits Junior Member Join Date: Oct 2009 Posts: 8	Mine always veers to the right when activated. When it finally straightens out it is ok. It leans stalks over too far and takes to long to straighten out, maybe 50 feet or so. Have tried changing aggressivness and other settings, but nothing helps. No solution yet. Any suggestions would be appreciated.

10-28-2011, 12:40 AM	#10 (permalink)
farmerjones Senior Member Join Date: Jul 2009 Location: SW Iowa Posts: 1,410	If you don't like the CNH you can always use the Deere universal one maybe....I have great luck with it.

Remove Advertisements Sponsored Links
The Combine Forum Advertisement