Stoughton aluminum grain trailers - The Combine Forum

LinkBack Thread Tools
post #1 of 3 (permalink) Old 03-29-2010, 04:02 PM Thread Starter
Senior Member
dieseldog's Avatar
Join Date: Feb 2006
Location: ND
Posts: 572
Mentioned: 0 Post(s)
Quoted: 39 Post(s)
Stoughton aluminum grain trailers

What are the good and the bad things about Stoughton trailers. I am looking at a 09 40ftr with ag hoppers air ride, just don't know much about them. They look really close to a timpte or wilson. thanks

dieseldog is online now  
Sponsored Links
post #2 of 3 (permalink) Old 04-03-2010, 07:33 AM
Senior Member
3x2188's Avatar
Join Date: Oct 2009
Location: Voda, Kansas
Posts: 154
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Re: Stoughton aluminum grain trailers

We have one that we bought brand new in the fall of 08. I like the fact that this trailer is pretty much as loaded as you can get, in standard form. It has all led lights, 2 rows of 5 side clearance lights, all aluminum rims, aluminum subframe. The only downfall so far has been on the front of the trailer in the supports for the front of the hopper. Make sure that you're trailer has a cross brace on the bottom of the sheeting at the top of the hopper, where it goes from the angle, then flattens out, clear at the front of the trailer. Ours didn't originally, and there were a few issues that were corrected under warranty. Also check around the landing gear, as they had all the connections welded around this area. These welds started to break out. Again warranty fixed them. They went back in with large gussets and riveted them in, so there would be a little flex. Other than that, we like the trailer. It's light weight, and the traps are super easy to open.

3x2188 is offline  
post #3 of 3 (permalink) Old 07-06-2010, 11:58 AM
Join Date: Jul 2010
Posts: 34
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Re: Stoughton aluminum grain trailers

We rented one for harvest in 2008 and we weren't too impressed it only hauled about 170000 bushel and when we took it back it already had some rivets popped out on the inside of the hopper. We were loading right at 54000lb net so its not like it was overloaded or anything. heck we have a 92 Wilson pacesetter with spring ride and load 60000+ net sometimes and haven't popped a rivet yet. Just seems hard to beat a Wilson. Just my opinion though
operationdeere is offline  
Sponsored Links

Quick Reply

Register Now

In order to be able to post messages on the The Combine Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome