The Combine Forum banner

Creation to the 1/32 of a firm French in years 60/70/80 Buildings and Equipment

60K views 239 replies 17 participants last post by  Blond 
#1 · (Edited)
Hello has all (I pass by a software of English French translation)


I will present to you the farm of my childhood, located in Pas-de-Calais. as I do not have much place in the apartment it is made has the scale 1/32, it evolves of the years 1920 has 2015, always in exploitation.


As there are not many miniatures of the last years I have it even carry out me, especially those which me one marked, like MF 510, Massey Harris 21, Claas Super Junior, and equipment European, which has never to put the wheels in North America

Cattle shed has cows and stables 1920

Densitée press low RIVIERRE CASALIS NR 2,100 of 1960/1970

Reaping-machine threshing-machine Massey Ferguson 510 of years 65/70

Manure spreader of the Sixtie

Tipcart wood has haulage animal modified for attachment tractor

Hutments wood of the years 1920, disappeared in the Eighties
 

Attachments

See less See more
10
#2 ·
Creation to the 1/32 of a firm Frenchwoman in years 60/70/80 Buildings and Equipment

Other photographs of equipment European of years 60/70

Continuation has war 14/18, the village was to shave, all constructions goes back to 1920.
many provisional wood constructions remained until in the Eighties
They were used as cattle shed has pig, of dwelling (parts for the daily blue-collar workers) garage etc.
Trailer LEGRAND 8 tons of 1970, modifiable in trailer has fourage.


Room of draft of the years 1970 - 3 stations in L
 

Attachments

#6 ·
Creation to the 1/32 of a firm Frenchwoman in years 60/70/80 Buildings and Equipment

Hello.


What expect title?
can be that the translation is not very good.


Afflicted

Small details on MF 510.


The table goes up and goes down. is detached for a future pick up.
The dividers are dismounted.
The screw turns.
The pickups turn, go down/go up, advance move back, the combs remains vertical.
The trap door of the conveyor 'opens to see the chain of food.
The engine cowling opens with the engine has the interior and all its accessories.
The conducting seat rises for the position upright.
The scale of access swivels
The screw of discharge swivels.
The back is dismounted for access to the shakers.
All the bonnet covers are dismounted for access to the belts.
The direction functions.
Inside the machine,
there is;
The beater.
Against beater
The vat has stones.
The Ba of reception
the ventilator with the deflectors.
The vat of de-dusting with its grids
Screws of transfers internal
6 shakers and the va



If you want to see some more
I am on a site in France


old agricultural valves
in the photographs of the miniatures


title
firm of Pas-de-Calais at the 1/32

Good day or good night has you
 

Attachments

#11 ·
Hello


My English is rather BASIC (school in years 1963/1964). therefore I use a software of translation.


To carry out MF 510, approximately 2 years with stops to avoid the irritation, beginning by the document retrieval, maintenance manual, spare parts, search for dimensions, plans various to understand the machine.


Realization out of styrene, (several times for certain parts, driving round cap). pickups, frame, etc.


Content that you like that.


So long
 
#17 ·
Mf 510

Hello


Here MF 510 with a driver (French) of the Seventies.


So long
 

Attachments

#18 ·
Hello


Realization of a pick up for MF 510, in the years 1970 it was useful has the harvest of dry peas and of colza, half-compartment with-precondition by a reaper has carpets from approximately 3 meter broad,
 

Attachments

#24 ·
Hello
Thank you for the comment.


Realization on the pickup, of the pulleys, Cardan joint and various axes


To go with MF 510, there was a andaineuse reaper has carpet on dimensioned with pickup cutting width 3700, it had been imported the USA in 1960, the training was by Cardan joint, of large wheels has tires and of the wheels of transport on the sides


If you have photographs or documents on standard of machine, I am interested


Thank you
 
#25 ·
Hello
Thank you for the comment.


Realization on the pickup, of the pulleys, Cardan joint and various axes


To go with MF 510, there was a andaineuse reaper has carpet on dimensioned with pickup cutting width 3700, it had been imported the USA in 1960, the training was by Cardan joint, of large wheels has tires and of the wheels of transport on the sides


If you have photographs or documents on standard of machine, I am interested


Thank you
 

Attachments

#28 ·
Hello


Completion of the pickup of MF 510


Beginning of construction of the MH 21
 

Attachments

Top