256 Versatile

dince · 08-30-2011, 08:44 AM

Am restoring a 256, having trouble getting some decals - does anyone know of source of reproduction ones, please? Also, has anyone attached a belt pulley to the PTO (540 rpm) to operate a saw bench on the 3PL - any suggestions please?

scott · 08-31-2011, 06:29 AM

Need to know what decals your looking for, for your pto drive Browning used to make a hub that fit splines, was used on old Allis and IH tractor to drive belly mowers, Scott.

dince · 08-31-2011, 10:37 AM

Dear Scott, Thank you for your reply. It's quite a list - I can provide the part numbers (both as per original Parts Book, and as per current parts listing on EZparts). I need 2 x PTO 540 rpm, 1 x hydraulic couplers, 4 x Versatile (for bonnet and loader), 2 x 256, 1 x parkbrake, 1 x operating instructions, 2 x brake, 1 x attachment safety, 1 x range selector, 1 x flow control, 1 x hydraulic float, 1 x three point hitch auto/manual, 1 x PTO warning, 1 x ROPS caution. I also need 2 x Versatile for the bonnet of a 555 I am also working on.

I'll follow up your advice re the belt pulley. I have quite a few more questions that I will come to! Kind regards, David Ince

scott · 08-31-2011, 01:47 PM

If you can get me part #'s that would be a big help, can use dealer locater to check on avialablity, Scott.

scott · 09-01-2011, 08:58 PM

Yes lets go via email snelsen@gondtc.com, whatever you need, Scott.

08-30-2011, 08:44 AM	#1 (permalink)
dince Junior Member Join Date: Jan 2011 Location: Australia Posts: 2	256 Versatile Am restoring a 256, having trouble getting some decals - does anyone know of source of reproduction ones, please? Also, has anyone attached a belt pulley to the PTO (540 rpm) to operate a saw bench on the 3PL - any suggestions please? Last edited by dince; 08-30-2011 at 08:59 AM.

08-31-2011, 06:29 AM	#2 (permalink)
scott Senior Member Join Date: Jun 2007 Location: Leeds, north dakota Posts: 1,170	Need to know what decals your looking for, for your pto drive Browning used to make a hub that fit splines, was used on old Allis and IH tractor to drive belly mowers, Scott.

08-31-2011, 10:37 AM	#3 (permalink)
dince Junior Member Join Date: Jan 2011 Location: Australia Posts: 2	Dear Scott, Thank you for your reply. It's quite a list - I can provide the part numbers (both as per original Parts Book, and as per current parts listing on EZparts). I need 2 x PTO 540 rpm, 1 x hydraulic couplers, 4 x Versatile (for bonnet and loader), 2 x 256, 1 x parkbrake, 1 x operating instructions, 2 x brake, 1 x attachment safety, 1 x range selector, 1 x flow control, 1 x hydraulic float, 1 x three point hitch auto/manual, 1 x PTO warning, 1 x ROPS caution. I also need 2 x Versatile for the bonnet of a 555 I am also working on. I'll follow up your advice re the belt pulley. I have quite a few more questions that I will come to! Kind regards, David Ince

08-31-2011, 01:47 PM	#4 (permalink)
scott Senior Member Join Date: Jun 2007 Location: Leeds, north dakota Posts: 1,170	If you can get me part #'s that would be a big help, can use dealer locater to check on avialablity, Scott.

09-01-2011, 08:58 PM	#5 (permalink)
scott Senior Member Join Date: Jun 2007 Location: Leeds, north dakota Posts: 1,170	Yes lets go via email snelsen@gondtc.com, whatever you need, Scott.

Remove Advertisements Sponsored Links
The Combine Forum Advertisement