Hello guys We have a problem with a 780 TT at the end of the harvesting we noticed a vibration when we started the front attachament. So if we put the cardan shaft and we start the machine the walls of the machine start to move on both sides. If we start the combine without the cardan of the...

I have a FD240 for my JD 780, what is the foot switch for,I'm just reading about it and installing the wiring, the ****s to be old and not understand the technical crap, I need some young guy to come and show me how to run it.

CEBIS tells me that the sensor is dirty and that I should clean it. Tried new eyes (not the whole sensor) and didn't make a difference. Is it possible that the receiving sensor is no good? I would think that if the sending sensor failed that there would be some other kind of error message, plus...

Looking for people's thoughts and opinions on the dhx 600 disk harrow by shulte. Currently run a heavy harrow and salford but the salford is getting mighty small and new ones are disgusting in price

Going through our 1680 trying to get it ready for beans and we noticed the pinion shaft on the RHS final started leaking over the winter. Drove it to the shop (kept it topped up) and removed the input shaft and the outer bearing and cap. Planned on just installing a new seal but when I twist the...