The Combine Forum - View Profile: 31dh

31dh 31dh is offline


  Visitor Messages

Showing Visitor Messages 1 to 3 of 3
  1. 31dh
    08-24-2015 05:40 PM - permalink
    Has anyone ran a Brown box & the command Center on a 9770 together? Last year we rented a 9870 & all that we could get was the steering on the Brown Box, the moisture & the grain loss does not show on the monitor. We are having the same problem with the 9770. Our AMS guy says it may not work together & that we should try the 2630 screen from the sprayer. We may need the sprayer at the same time. Any suggestions would be appreciated.
  2. 31dh
    08-23-2014 12:36 PM - permalink
    We have a 9660 with a 615P header. The problem is the belt with the teeth on runs crossways & to one side at times.We can't figure out why it is doing that. Any suggestions would be appreciated. We use it basically for Canola.
  3. 31dh
    06-13-2013 12:07 AM - permalink
    4700 JD sprayer Planetary rear. We replaced seals last yr and this spring replaced all bearings and seals,leaking again. JD dealers to busy to help us.Any one know torque on lock nut that hold on bearings or any other specs that will help.Any help much appreciated


Total Posts
Visitor Messages
General Information
  • Last Activity: 08-23-2019 02:50 PM
  • Join Date: 08-16-2011
  • Referrals: 0


No results to display...


10:01 AM - 460 quoted 31dh in post 9660 Rotor Problems
Rotor rubbing on the back...
06:42 AM - Ozzie quoted 31dh in post 9660 Rotor
Smoke started coming out ...
05:38 PM - chance2 quoted 31dh in post 2360 swather
Header 160 -30ft double s...
For the best viewing experience please update your browser to Google Chrome