Agra-GPS JD to Claas bridge wont steer
Its a saturday and agra-gps is closed. I feel like this is a really simple oversight on my end that someone has done before.
JD starfire ITC
2015 Claas 750tt
2630/itc working fine, full signal. There is no autotrac activation on it, SF1 signal. Id autotrac needed? I turned on the autotrac demo option since theres still 13.5hrs available but no change. Im thinking my problem lies with the fact that there is no ON/OFF wheel like when its hooked to a deere. Theres usually a circle cut in quarters that you have to click on the screen to turn on before your armrest engage works. My circle or autosteer on button is nowhere on the screen. Tried to format the screen different to make it appear with no luck.
The Cebis ive tried on all settings but im guessing "GPS" is the correct one. It is also turned to ON.
This is my error code.
GPS signal faulty
The values of the amplified guide sensor (GPS PILOT) have been identified as invalid during the automatic steering. Communication error. Check plug connections and lines. Restart the vehicle.
CCN A066 FMI12
Last edited by HoRFarmsJesse; 08-17-2019 at 03:08 PM.