1020 crop dividers - The Combine Forum
Reply
 
LinkBack Thread Tools
post #1 of 11 (permalink) Old 10-02-2010, 12:03 AM Thread Starter
Senior Member
 
Join Date: Aug 2009
Posts: 134
Mentioned: 0 Post(s)
Quoted: 2 Post(s)
1020 crop dividers

I've got a 1020 and I don't have the long crop dividers on it. We're combining 10% beans with stems that you can ring water out of and the head is plugging between the reel and the black snout. All I have is a white tip on the black snouts and I am wondering if by spending 750 bucks on the Case IH dividers will fix the problem. Thanks, Ryan

cih2188 is offline  
Sponsored Links
Advertisement
 
post #2 of 11 (permalink) Old 10-03-2010, 06:48 PM
Senior Member
 
Join Date: Apr 2009
Location: Central, Ohio
Posts: 629
Mentioned: 0 Post(s)
Quoted: 4 Post(s)
yes the long divider are excellent for soybeans as long as they are setup right

ihdriver7088 is offline  
post #3 of 11 (permalink) Old 10-19-2010, 02:38 PM
Member
 
Join Date: Apr 2010
Posts: 58
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Ryan,

How did you make out? I think I have a similar issue.
Here is what I have found out........................

I noticed on the Dividers there were two 1" X 7" metal straps, welded to the inside of the divider to deflect the beans into the knives.

Both the right and left sides of my head were plugging and dragging trash.

I found that the double knife on the right side was broken , and that one of the pieces that deflects the beans into the cutting bar on the Left Side was broken off. I fabricated a piece for the left side but have not welded it on yet.

My only question is are these two deflectors a stock 1020 part or a product of a farmer with a welder and a great imagination..........

I have not had the chance to look at another 1020 head to compare it to.

Any input appreciated.............

Bartman
bartman is offline  
Sponsored Links
Advertisement
 
post #4 of 11 (permalink) Old 10-19-2010, 06:20 PM
Senior Member
 
Join Date: Apr 2009
Location: Central, Ohio
Posts: 629
Mentioned: 0 Post(s)
Quoted: 4 Post(s)
bartman i saw you tried posting pics of what you are talking about and i cant elaborate without seeing what you are exactly looking at on my 2007 1020 and were you are talking i just have a 1/4" by 4" rod that leads from the black divider snout to the nearest gaurd tip when i go out to the farm again i will get pics to show you what exactly i have
ihdriver7088 is offline  
post #5 of 11 (permalink) Old 10-19-2010, 09:17 PM
Member
 
Join Date: Apr 2010
Posts: 58
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Hey IH Driver

I was trying to copy & paste pictures from the IH manual and it did not work. I will try to post pics tomorrow to make it more clear. Appreciate the response........
Bartman
bartman is offline  
post #6 of 11 (permalink) Old 10-19-2010, 09:48 PM
Member
 
Join Date: Apr 2010
Posts: 58
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
OK Went out and took a picture ..I will try to upload it.
Looks like it uploaded . Hope this clears things up a bit.

Bartman
Attached Images
File Type: jpg Crop Divider.jpg (521.6 KB, 67 views)
bartman is offline  
post #7 of 11 (permalink) Old 10-20-2010, 05:22 AM
Member
 
Join Date: Apr 2010
Posts: 58
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Oh, by the way my 1020 header was built in 1990

Bartman
bartman is offline  
post #8 of 11 (permalink) Old 10-20-2010, 11:05 AM
Senior Member
 
Join Date: Apr 2009
Location: Central, Ohio
Posts: 629
Mentioned: 0 Post(s)
Quoted: 4 Post(s)
ok then yours have been added by previous owner seeing as how its standard on later model 1020's since mine is factory and they used like a 1/4" rod that is a bout 4-6 inches long doing the same thing which i have had no issues with and i got my actual dividers set so that piece there isnt really doing anything but just being there
ihdriver7088 is offline  
post #9 of 11 (permalink) Old 10-20-2010, 11:07 AM
Senior Member
 
Join Date: Apr 2009
Location: Central, Ohio
Posts: 629
Mentioned: 0 Post(s)
Quoted: 4 Post(s)
oh and as for your left hand trash dragging try tightening the spring under the black plastic shield lightening the ground pressure of the wobble box and check and make sure your poly (if equipped) is all in place
ihdriver7088 is offline  
post #10 of 11 (permalink) Old 10-20-2010, 08:54 PM
Member
 
Join Date: Apr 2010
Posts: 58
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Thanks IH Driver, I adjusted the left spring pressure last time and it improved a bunch. I only had about 6 acres of re-plant to go, in a wet field, so I just bumped up the head a bit and finished it all off tonight , before it starts raining again.

My poly skids are about 50 % "JUNK" so I am thinking of replacing them for next year , tightening up the spring a little more, and welding up the piece I fabricated for the left side . Hopefully the head will behave better next year.

Time to take a break now , then I need to figure out how to set the 1640 up for "Wheat" next summer.It threshed the soybeans so nice this year I don't want to touch anything.

Thanks all for all of your help getting me through my first year.............

Bartman

bartman is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the The Combine Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Similar Threads
Thread Thread Starter Forum Replies Last Post
1020 head dividers.. missing part bartman Headers 0 10-15-2010 11:27 PM
WTB: case ih 1010-1020 rod dividers ihdriver7088 For Sale/Want to Buy 4 07-27-2010 04:35 PM
crop dividers Snipe Sprayers / Chemicals / Fertilizer 17 07-09-2009 02:11 PM
Flex Crop Dividers dirtcheap Headers 12 12-18-2007 12:37 PM
crop dividers for a 930 flex f_armer Headers 1 08-04-2006 10:45 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome