The Combine Forum

The Combine Forum (https://www.thecombineforum.com/forums/)
-   Headers (https://www.thecombineforum.com/forums/13-headers/)
-   -   1020 reel problem (https://www.thecombineforum.com/forums/13-headers/9027-1020-reel-problem.html)

barryusherwood 09-21-2009 08:48 AM

1020 reel problem
 
Wondering if anyone has any suggestions on this. The reel will slow down/stop for no reason. If I raise the header it will start again and if I put the header right down the reel will stop. I'm thinking some kind of hyd. issue somwhere. Sometimes turning the the reel speed up helps but not always. The header is an older model 1020 25F on a 19861680.

amax 09-21-2009 03:47 PM

Re: 1020 reel problem
 
hi
check the side that has the motor on it an see if the weld on the shaft is broken


amax

robmgrig 09-21-2009 03:57 PM

Re: 1020 reel problem
 
There is a bolt that connects motor to reel. Mine has come out before. Also could be a broken wire going to reel solenoid on left side of feeder house. There is an adjustment screw on side of solenoid that bypasses reel speed switch. If reel starts to turn when you screw it out then it is solenoid or wiring problem. It sounds like you have a broken wire that is only makig contact when you let header down

midwest 09-21-2009 05:26 PM

Re: 1020 reel problem
 
I think we had a key-way fall out of one of the sprockets on the hyd. drive. Isn't there a plastic shield over the chain drive and the key-way was laying in there? Been a few years since I ran a 1020.

1660way 09-22-2009 04:38 AM

Re: 1020 reel problem
 
I had that happen before . It was a loose ground wire on throat that was the problem check on left side of throat where the wiring harness splits off and goes to the rotor speed senor.

barryusherwood 09-30-2009 04:16 PM

Re: 1020 reel problem
 
Thanks for the info guys. The problem turned out to be the bolt that the ground wire for the solenoid was bolted to was loose. Tightened her up and things worked well since.


All times are GMT -4. The time now is 04:52 PM.

Powered by vBulletin® Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.

vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.