The Combine Forum - View Profile: Gianluca

Gianluca Gianluca is offline

Member

  Visitor Messages

Showing Visitor Messages 1 to 3 of 3
  1. francois
    07-02-2019 03:45 PM - permalink
    francois
    Hi Gianluca,

    I'm located in North of France and I've build rtk system based on 2 M8T + small Ublox antenna
    giving nmea signal to agopengps.

    It works but it's difficult to get FIX and to keep it (very clear sky required)
    I've searched and try to modify several settings in M8T and in RTKNAVI configuration without better results.

    If you use the same configuration (M8T + small Ublox antenna), are you able to have FIX easyly and for a long time ?
    If so, do you have taken special care on the electrical or mechanical design,
    or in the configurations files in each M8T and in RTKNAVI adapted for Europe ?

    I'm interested to know and find what is my problem to get more FIX
    best regards
    francois
  2. Gianluca
    03-11-2019 09:12 AM - permalink
    Gianluca
    thank you. if you don't have used resistors do you think i burnt mma and bno because i used arduino as power supply for those sensors?
  3. Kaupoi
    03-11-2019 07:30 AM - permalink
    Kaupoi
    Hi! I don't have any resistors connected to BNO. Here is schematics I used: https://1drv.ms/b/s!Ao6_PnVNR5RXg_BRVFh_bPPSFC8QNQ

  Statistics

Total Posts
Visitor Messages
General Information
  • Last Activity: Today 03:40 AM
  • Join Date: 01-05-2019
  • Referrals: 0

  Mentions

No results to display...

  Quotes

07-20-2019
01:02 AM - crash5291 quoted Gianluca in post AgOpenGPS
Till I get a better understan...
07-19-2019
12:20 PM - Kaupoi quoted Gianluca in post AgOpenGPS
Hi Kaupoi do you know if it ...
10:23 AM - m_elias quoted Gianluca in post AgOpenGPS
No, only 1 base connected to ...
07:32 AM - Gianluca quoted Kaupoi in post AgOpenGPS
... my #1 setup. Hi Kaupoi do you know if it i...
05-24-2019
04:25 AM - Gianluca quoted WTalen in post AgOpenGPS
... purpose. Thanks Wtalen. I understand very w...
05-02-2019
05:51 AM - Gianluca quoted pauluzs in post AgOpenGPS
Not sure, if i recall correc...
05-01-2019
02:00 PM - pauluzs quoted Gianluca in post AgOpenGPS
do you remeber the name of th...
04-30-2019
08:02 PM - Gianluca quoted pauluzs in post AgOpenGPS
Haven't tried using ledstrip...
02:07 PM - pauluzs quoted Gianluca in post AgOpenGPS
Hi all. I am trying to includ...
04-26-2019
07:23 AM - Gianluca quoted kaanakgser in post AgOpenGPS
Maybe they can give you some id...
05:23 AM - kaanakgser quoted Gianluca in post AgOpenGPS
Thank you apm. I confess i kn...
12:47 AM - BrianTee quoted Gianluca in post AgOpenGPS
Thank you apm. I confess i kn...
04-25-2019
04:51 PM - apm quoted Gianluca in post AgOpenGPS
i would like to know how to d...
01:29 PM - Gianluca quoted Andreas Ortner in post AgOpenGPS
We have distanceFromLine in arduino...
12:48 PM - Andreas Ortner quoted Gianluca in post AgOpenGPS
i would like to know how to d...
11:44 AM - Gianluca quoted dairytech in post AgOpenGPS
Yes, with open source anything...
11:36 AM - dairytech quoted Gianluca in post AgOpenGPS
Hi, is it possible to build a...
04-10-2019
06:19 PM - Gianluca quoted ropecope in post AgOpenGPS
And check what you set in the...
04:33 PM - ropecope quoted Gianluca in post AgOpenGPS
You need to open the field, t...
04:22 PM - ropecope quoted Gianluca in post AgOpenGPS
You need to open the field, t...
 
For the best viewing experience please update your browser to Google Chrome