AgOpenGps - Ntrip/gps problem - The Combine Forum
 6Likes
Reply
 
LinkBack Thread Tools
post #1 of 30 (permalink) Old 08-19-2019, 11:11 AM Thread Starter
Junior Member
 
Join Date: May 2019
Location: Heemskerk, The Netherlands
Posts: 24
Mentioned: 0 Post(s)
Quoted: 24 Post(s)
AgOpenGps - Ntrip/gps problem

Hello everybody.

I have a problem with the Ntrip-client.

When I start the Ntrip-client and the countdown begins, the seconds are during ten times a second. Problem is gone when GPS hardware is removed and you test with Simulator mode on.
Nothing found in the logfile. I found out that this problem exists from commit '3cd4178cf92ffb6dd2d6212e89f6de46a12fd1c1 [3cd4178] (Stable July)'. When I test with one commit before '464f53f956b17edcf10464735be0acfe5bdcc983 [464f53f]' the problem not exists.

@BrianTee Hope you can help to fix this.

Thanks in advance!

heaky is offline  
Sponsored Links
Advertisement
 
post #2 of 30 (permalink) Old 08-19-2019, 12:17 PM
Senior Member
 
Join Date: Aug 2012
Location: Vermilion Alberta Canada
Posts: 5,728
Mentioned: 19 Post(s)
Quoted: 2496 Post(s)
Quote:
Originally Posted by heaky View Post
Hello everybody.

I have a problem with the Ntrip-client.

When I start the Ntrip-client and the countdown begins, the seconds are during ten times a second. Problem is gone when GPS hardware is removed and you test with Simulator mode on.
Nothing found in the logfile. I found out that this problem exists from commit '3cd4178cf92ffb6dd2d6212e89f6de46a12fd1c1 [3cd4178] (Stable July)'. When I test with one commit before '464f53f956b17edcf10464735be0acfe5bdcc983 [464f53f]' the problem not exists.

@BrianTee Hope you can help to fix this.

Thanks in advance!

Can you take a little video or a screenshot of what is happening?

BrianTee is offline  
post #3 of 30 (permalink) Old 08-20-2019, 05:22 AM Thread Starter
Junior Member
 
Join Date: May 2019
Location: Heemskerk, The Netherlands
Posts: 24
Mentioned: 0 Post(s)
Quoted: 24 Post(s)

Please let me know if you need more or other information.
heaky is offline  
Sponsored Links
Advertisement
 
post #4 of 30 (permalink) Old 08-20-2019, 10:56 AM
Senior Member
 
Join Date: Aug 2012
Location: Vermilion Alberta Canada
Posts: 5,728
Mentioned: 19 Post(s)
Quoted: 2496 Post(s)
Quote:
Originally Posted by heaky View Post
https://youtu.be/a5N0_DYrliI

Please let me know if you need more or other information.

Very strange. Try this. Delete the whole application. Go to C:\Users\YourProfileNameHere\AppData\Local\AgOpenG PS and delete everything in there. Download the latest version and try and see if that helps. Also can you try on a different computer?


Seems to work on this end.
BrianTee is offline  
post #5 of 30 (permalink) Old 08-20-2019, 11:49 AM Thread Starter
Junior Member
 
Join Date: May 2019
Location: Heemskerk, The Netherlands
Posts: 24
Mentioned: 0 Post(s)
Quoted: 24 Post(s)
Thanks for your time!

- Removed the content in de Local AppData map, same behaviour.
- Download the latest commit, same behaviour.
- Other laptop with clean AgOpenGps (latests version) same problem / behaviour.

When I removed the GPS hardware (uBlox F9P, ardusimple) and switched the Simulator on, the Ntrip counter / communications works ok.
heaky is offline  
post #6 of 30 (permalink) Old 08-20-2019, 01:58 PM
Senior Member
 
Join Date: Jun 2018
Location: Denmark
Posts: 107
Mentioned: 5 Post(s)
Quoted: 58 Post(s)
Quote:
Originally Posted by heaky View Post
Thanks for your time!

- Removed the content in de Local AppData map, same behaviour.
- Download the latest commit, same behaviour.
- Other laptop with clean AgOpenGps (latests version) same problem / behaviour.

When I removed the GPS hardware (uBlox F9P, ardusimple) and switched the Simulator on, the Ntrip counter / communications works ok.
Your frame count or time pr frame(number after Hz in top line of screen)must be high (over 20) when problem comes.

Did you restart after turning off simulator?

Have you set sim cords to your place (should be same cords as the field you open) So set sim cords and make new field.

I have noticed that frame count gets high if I open a local field in sim, and start A B line autosteer, when sim cords is standard (probably at Brians place in Canada)

Last edited by LarsVest; 08-20-2019 at 02:02 PM.
LarsVest is offline  
post #7 of 30 (permalink) Old 08-20-2019, 04:19 PM
Senior Member
 
Join Date: Aug 2012
Location: Vermilion Alberta Canada
Posts: 5,728
Mentioned: 19 Post(s)
Quoted: 2496 Post(s)
Quote:
Originally Posted by heaky View Post
Thanks for your time!

- Removed the content in de Local AppData map, same behaviour.
- Download the latest commit, same behaviour.
- Other laptop with clean AgOpenGps (latests version) same problem / behaviour.

When I removed the GPS hardware (uBlox F9P, ardusimple) and switched the Simulator on, the Ntrip counter / communications works ok.

Does everything else work just fine, autosteer etc?
BrianTee is offline  
post #8 of 30 (permalink) Old 08-20-2019, 04:26 PM Thread Starter
Junior Member
 
Join Date: May 2019
Location: Heemskerk, The Netherlands
Posts: 24
Mentioned: 0 Post(s)
Quoted: 24 Post(s)
@LarsVest Looking tomorrow for the frame count, I finally knows what that integer means now. :-). I will also set and test with the sim cords. @BrianTee Almost going to sleep in The Netherlands, do you have any idea what is going wrong?
heaky is offline  
post #9 of 30 (permalink) Old 08-21-2019, 01:14 AM
Senior Member
 
Join Date: Aug 2012
Location: Vermilion Alberta Canada
Posts: 5,728
Mentioned: 19 Post(s)
Quoted: 2496 Post(s)
Quote:
Originally Posted by heaky View Post
@LarsVest Looking tomorrow for the frame count, I finally knows what that integer means now. :-). I will also set and test with the sim cords. @BrianTee Almost going to sleep in The Netherlands, do you have any idea what is going wrong?

That's really strange. If everything else is working, so should that. Stumped.
Can you post a screen shot of NTRIP settings? It could be that the site isn't allowed by your firewall so it times out/locks up etc and then tries again. Lots of people use it, so pretty sure it works.

Last edited by BrianTee; 08-21-2019 at 01:20 AM.
BrianTee is offline  
post #10 of 30 (permalink) Old 08-21-2019, 01:28 AM Thread Starter
Junior Member
 
Join Date: May 2019
Location: Heemskerk, The Netherlands
Posts: 24
Mentioned: 0 Post(s)
Quoted: 24 Post(s)
@BrianTee No other hardware connected. Only mouse and gps receiver. Autosteer/section control not configured and enabled in AOG. Firewall already disabled. I'll post a screenshot of the Ntrip settings later. Other thinking, possible that the F9P sends to many other info through usb for AOG?

heaky is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the The Combine Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome