The Combine Forum - View Single Post - MacDon FD75 wing float issues
View Single Post
post #10 of (permalink) Old 08-16-2019, 01:05 AM
Slashnburn2
Senior Member
 
Join Date: Aug 2017
Location: Interlake
Posts: 325
Mentioned: 0 Post(s)
Quoted: 92 Post(s)
Quote:
Originally Posted by Twix View Post
There is a “breakable fuse” under the header. Protection for the header and combine should you catch something with the header.

If broke you replace it and with header down rock the tilt back and forth until you hear a Big Bang. The arm and rubber bumper get bound up when the fuse breaks and nothing works right until they fall back into proper position.
This is what I mean by my previous post. If the bolt is hitting the frame it's likely that she's broken and the header frame has pushed back against the adapter.

If you need to you can still keep running by pushing the header down onto the ground a bit, and jimmy the tilt fore/aft and side to side till it pops. Then you'll be good again till you get too vigorous and it acts up again. Sometimes it works fine, others not so much.


Last edited by Slashnburn2; 08-16-2019 at 01:08 AM.
Slashnburn2 is online now  
 
 
For the best viewing experience please update your browser to Google Chrome