The Combine Forum - View Profile: kipper

kipper kipper is offline

Senior Member

  Visitor Messages

Showing Visitor Messages 1 to 4 of 4
  1. CRToney
    09-18-2013 05:57 PM - permalink
    CRToney
    We already had some components and I was familiar with installation and operation. Our dealer is good and it would have cost me twice as much for the NH system. A buddy has the same system on the same machine so he's just a ph call away if I ran into a snag. It seemed accurate enough. We set swather to 29 ft silaging we couldn't take a full 30 ft so we set to 25 ft and it worked great.
  2. CRToney
    09-16-2013 08:30 PM - permalink
    CRToney
    Outback VsI with sts is what we used. It worked ok. Set it to 17.5 ft. Outback has good support. It took me a while to pull steering wheel. Less expensive than other auto steer.
  3. CRToney
    09-11-2013 02:17 PM - permalink
    CRToney
    I talked to one salesman who couldn't sell us a new machine said to get a discbine if we would avg 2.5-3 bales per ac if less than that get sickle machine. We bought a NH8060 so we could run a 16' discbine if we wanted. We could cut 7.5 mph in light hay with the 18' haybine. We bought a baleking 14 wheel rake as our jiffy was needing replacement. It is twice the rake of the jiffy. If you have heavy hay get a disc is my understanding but if you have a lot of stones get a sickle. I guess you have to change knives on disc machines quite often. We could easily cut 100 ac from noon till quitting time. We put in outback auto steer too.
  4. harvestmoon
    02-02-2013 11:49 AM - permalink
    harvestmoon
    Our growing season is very much like Grande Praire. Seems like we might be abit dryer for the most part. Yeah it's been a really cold winter. Last summer we had record high temps. we were low to mid 30 degree celious for like 60 straight days. With the record high being 41. So yeah it gets warm up north to. Where are you from??

    Joe

  About Me

  • About kipper
    Location
    Brandon, Manitoba
    Occupation
    Farmer

  Statistics

Total Posts
Visitor Messages
General Information
  • Last Activity: 04-15-2019 09:19 PM
  • Join Date: 11-09-2009
  • Referrals: 0

  Friends

Showing Friends 1 to 2 of 2
  • CRToney
    • CRToney is online now
  • mbfarmer
    • mbfarmer is offline

  Mentions

No results to display...

  Quotes

06-02-2018
03:38 PM - kipper quoted joesixpack in post Canola planters 2018
There's no time like the presen...
03:01 PM - kipper quoted Windmillfarms in post Canola planters 2018
WHat spacing? And how long does it...
06-01-2018
11:03 PM - joesixpack quoted kipper in post Canola planters 2018
We run a Maestro, planted c...
05-31-2018
11:01 PM - Windmillfarms quoted kipper in post Canola planters 2018
We run a Maestro, planted c...
12-30-2017
11:20 PM - BrianTee quoted kipper in post Bourgault Seed Singulation
SWMan how do you get on you...
10:20 PM - SWMan quoted kipper in post Bourgault Seed Singulation
SWMan how do you get on you...
06-25-2017
10:45 AM - kipper quoted joesixpack in post Pull spin vs air floater
13-15 MPH was pretty comfortabl...
10:44 AM - kipper quoted grain farmer 88 in post Pull spin vs air floater
Would a 7280r on 710 metrics be enou...
03-22-2017
10:50 PM - meritmat quoted kipper in post RB Auction @ Regina
Was interested in the baler...
03-20-2017
10:58 AM - kipper quoted skgrain1 in post Good Farm Welder
Im guessing yours is same Mig...
03-19-2017
09:45 AM - skgrain1 quoted kipper in post Good Farm Welder
We have a miller 212 autose...
03-11-2017
11:45 AM - kipper quoted Chevelle in post Soybeans- How-to?
We have solid seeded with our...
11-18-2016
10:43 PM - kipper quoted Windmillfarms in post Canola Seeding Rates?
oh i forgot about soil compaction,...
05-28-2016
10:14 PM - Jason Hildebrand quoted kipper in post Sprayer quotes
How are you liking the NH? ...
02-07-2016
05:54 PM - Licensed to kill quoted kipper in post picture insertion test
Sounds like a good system a...
05:47 PM - kipper quoted Licensed to kill in post picture insertion test
Thanks. The tank holds 16.5 cubes (ab...
05:39 PM - Licensed to kill quoted kipper in post picture insertion test
Real nice outfit. Good look...
01-24-2016
08:46 PM - SWFarmService quoted kipper in post New Holland front boom Chem eductor
Thanks for the pictures. Lo...
08:03 PM - kipper quoted SWFarmService in post New Holland front boom Chem eductor
Keep in mind my suspension is all ...
01-23-2016
03:18 PM - SWFarmService quoted kipper in post New Holland front boom Chem eductor
Thanks. Greatly appreciated...
 
For the best viewing experience please update your browser to Google Chrome