JD9610 Rub bars look crooked or angled...??? - The Combine Forum
 3Likes
Reply
 
LinkBack Thread Tools
post #1 of 19 (permalink) Old 09-07-2019, 02:51 PM Thread Starter
Junior Member
 
Join Date: Sep 2013
Location: Camrose, Alberta
Posts: 6
Mentioned: 0 Post(s)
Quoted: 1 Post(s)
JD9610 Rub bars look crooked or angled...???

We are changing the rub bars and concave in our 9610. We noticed that the old bars were crooked and started to look for anything that would make them look that way. Shafts, bearings, Spiders, etc, but nothing was broken or out of place. We installed the new concave and rub bars (at an angle) and everything fit very well. Now one mechanic told us that this was normal for the 9610 and another said the bars should be straight.....we are confused. Should they be straight? OR is this a concave/rub bar upgrade? Running empty, everything is smooth with nothing being wrong. Are we missing something? HELP!!!

Attached Images
File Type: jpg 9610RubBars.jpg (61.2 KB, 22 views)
coldcanuk is offline  
Sponsored Links
Advertisement
 
post #2 of 19 (permalink) Old 09-07-2019, 02:58 PM
Senior Member
 
Join Date: Aug 2017
Location: yorkton
Posts: 717
Mentioned: 0 Post(s)
Quoted: 117 Post(s)
Nope totally no good not going to run like that.
Key or spider hub is sheared.
Bars should be straight across.
Thought there was a improvement that could be done to add a 3rd keyed spider.

MF cowboy is offline  
post #3 of 19 (permalink) Old 09-07-2019, 03:14 PM Thread Starter
Junior Member
 
Join Date: Sep 2013
Location: Camrose, Alberta
Posts: 6
Mentioned: 0 Post(s)
Quoted: 1 Post(s)
exactly what we thought, but could not find anything sheared, twisted or wrong.
coldcanuk is offline  
Sponsored Links
Advertisement
 
post #4 of 19 (permalink) Old 09-07-2019, 03:47 PM
Senior Member
 
Jeff-C-IL's Avatar
 
Join Date: Jul 2015
Posts: 1,153
Mentioned: 0 Post(s)
Quoted: 209 Post(s)
LOok carefully at the hub centers on the main shaft. As noted, either the key is sheared, or the hub weld is broken, allowing the hub to rotate in the spider plate.

You are going to likely have to completely remove the cylinder (unless you get real lucky and its just a key). Pull the feeder off, only way to go when doing that.

AHHC specialist
Jeff-C-IL is offline  
post #5 of 19 (permalink) Old 09-07-2019, 04:41 PM
Senior Member
 
lanwickum's Avatar
 
Join Date: Jul 2011
Location: North Central Montana
Posts: 1,932
Mentioned: 0 Post(s)
Quoted: 326 Post(s)
Did they get mounted one cog off from one side to the other? If nothing is broken or missing that would be my best guess. May have to remove them all and mount them again if that would straighten things out. Make certain nothing is twisted, broken, missing.
lanwickum is offline  
post #6 of 19 (permalink) Old 09-07-2019, 04:56 PM
Senior Member
 
Hillbillyreefer's Avatar
 
Join Date: Aug 2011
Posts: 994
Mentioned: 0 Post(s)
Quoted: 186 Post(s)
Definitely not right.

I’ve got a complete cylinder laying here that needs bars but otherwise is good if you need parts quick and cheap, about 2hrs from you. Right about 1500hrs on it, I replaced the entire cylinder with a high inertia from Sunnybrook.
Hillbillyreefer is offline  
post #7 of 19 (permalink) Old 09-07-2019, 11:23 PM
John Force - Legend
 
phantom970's Avatar
 
Join Date: Jul 2010
Location: Rooty Hill
Posts: 1,610
Mentioned: 1 Post(s)
Quoted: 331 Post(s)
Looks like a Monday morning job after a HUGE weekend...........

Not right but very very curious how it will perform, go give it a whirl and report back

Square box........
Round pizza.......
Triangle pieces....

Iam confused......


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
phantom970 is offline  
post #8 of 19 (permalink) Old 09-07-2019, 11:27 PM Thread Starter
Junior Member
 
Join Date: Sep 2013
Location: Camrose, Alberta
Posts: 6
Mentioned: 0 Post(s)
Quoted: 1 Post(s)
May just call you up....Can you PM me with your asking price and location. thanks
coldcanuk is offline  
post #9 of 19 (permalink) Old 09-08-2019, 12:46 AM
Senior Member
 
Hillbillyreefer's Avatar
 
Join Date: Aug 2011
Posts: 994
Mentioned: 0 Post(s)
Quoted: 186 Post(s)
I just went out and made sure it was still here. It is, it’s been sitting outside for 3yrs and 1week. It looks straight in the dark, I’ll pull it out and grab some pictures in the morning.

I’ll pm the pics and my contact info.
Hillbillyreefer is offline  
post #10 of 19 (permalink) Old 09-08-2019, 11:39 AM
Senior Member
 
Hillbillyreefer's Avatar
 
Join Date: Aug 2011
Posts: 994
Mentioned: 0 Post(s)
Quoted: 186 Post(s)
I pmd you some details and my contact info.

Attached Images
File Type: jpeg 261881ED-DA25-46E6-A939-2A9DFCA2DC90.jpeg (2.71 MB, 14 views)
File Type: jpeg 656863BC-40BC-4307-95AD-6E8FDACB40DA.jpeg (2.73 MB, 11 views)
File Type: jpeg FFF718EE-EA3B-489E-B7A0-21AE4BBC958A.jpeg (2.22 MB, 12 views)
File Type: jpeg 0534D8F1-B4E8-47C4-8600-1DED1C0EC8EB.jpeg (2.36 MB, 14 views)
Hillbillyreefer is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the The Combine Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome