The Combine Forum banner

Search results

1-20 of 27 Results
Advanced Search
  1. 7120 won't shift?

    Case IH
    Went to move the machine today and I get the message it won't shift.Go back to the previous gear. Wire disconnected. Does anybody know were to look? Thanks, KAD
  2. Rock trap on 7120 ?

    Case IH
    The most rocks I've ever dumped at once is one. I hear them go straight through way to often. The 2388 would have many rocks in the trap .
  3. Rock trap on 7120 ?

    Case IH
    Is there anyway to improve the rocktrap on a Flagship machine? I have owned a couple of Flagship machines and the rocktrap sucks. May be only stops 1 or 2 rocks out of 10. Have owned a 2388 and a 1688 and they would stop 9 out of 10 rocks. I would hate to think what it would be like if I didn't...
  4. Unloading auger on 7120 ?

    Case IH
    My auger wants to retract by itself. Can make a big mess when unloading. Is this a sensor problem? Where is the sensor? Thanks
  5. 8230 Wheat Settings - bad sample

    Case IH
    I have a 7120 and ran my concave at 1. Almost all the way closed. Spring wheat.
  6. Skid shoes on FD75 ?

    Headers
    Thanks, I was talking the adjustable inboard and outboard shoes.
  7. Skid shoes on FD75 ?

    Headers
    Macdon web site does list them as an option.
  8. Skid shoes on FD75 ?

    Headers
    I had skid shoes on my CHI 2162, bought a FD75 and it came without shoes. I always thought they helped going through ditches, etc. Am talking for beans. Dealer says I do not need them. What do you guys think? I actually wore out a couple of shoes on my 2162 so they had to be doing something...
  9. Sieve offset on Case 7120 combine ?

    Case IH
    Can't remember, do I want a + or - offset for wheat. To help with overloading on right side. I,ve read both ways ? Thanks, KAD
  10. 7120 return to cut problem ?

    Case IH
    Thanks , will give it a try tomarrow. KAD
  11. 7120 return to cut problem ?

    Case IH
    Have a 2162 head on my 7120. When I hit return to cut some times it will go down all the way and some time it goes down to about 4" from the ground. If I hit the button again it then goes to the ground. About two thirds of the time I have to double click to get it to ground leval.I have done a...
  12. 7120 sieve error ?

    Case IH
    I get the error message : lower sieve is not in command position. Anybody know anything about this ? Thanks, KAD
  13. Quadtrack cab air ride kit ?

    Tractors
    Those of you that have them, are they very hard to install yourself ? I saw the pics from previous theads . The one from Torgerson's I see the ladder is in the out position with a little guard rail that mounts at the top of the steps where the ladder would normally be. Is this good or bad. What...
  14. 7120 noisy feederhouse ?

    Case IH
    In heavy beans I am getting alot of rattleing sounds.In lighter beans it's quieter. My 7010 never made sounds like this. Just put in a new feeder chain. The connector links failed. The ones with the nuts. Any ideas on the noise problem? Thanks, KAD
  15. 7010 problem in corn last fall ?

    Case IH
    Thanks, I'll check that out. I to thought it was strange that I was overloading on the left side. The corn was literaly running out the back of the combine on the left side. Like I said it was during damp conditions. KAD
  16. 7010 problem in corn last fall ?

    Case IH
    8859jd, I went out to the shop and measured the heights you mentioned and I only have 1/2" differance from front to back of the platform the tool box sits on. A mudhog was installed on this machine when it was new.Maybe they screwed up the install. Should I shoot for 58" from the rear of the...
  17. 7010 problem in corn last fall ?

    Case IH
    Can't remember settings offhand, but had no tailings problem because I run the shoe wide open. Never have had corn in the fan.I think my sieve is set at a 1 or 2 degree offset. Maybe should be more. Thanks, KAD
  18. 7010 problem in corn last fall ?

    Case IH
    My 7010 wanted to throw corn over the top sieve real heavy on the left side. There was a solid stream of corn on the ground on the left side. When this happened it was early in the morning and it was damp from a light rain during the night. I done a quick kill and the left side was totaly...
  19. 2162 won't release to flex on left side ?

    Headers
    Read post below . Have the same problem. Does anyone have a part number or diagram. Thanks, KAD
  20. 7010- breaking feeder chains

    Case IH
    Ran several rocks through mine. Bent some feeder bars. Too much power and not enough slip. Rock trap doesn't work as good as 2388. I roll all mine but pick up a rock sometimes going through drainage ditches. Also run a 2162. Like it ! KAD
1-20 of 27 Results
Top