The Combine Forum banner


  1. Planting & Tillage
    Bourgault 3310 pulled by a stx440. When seeding the shank pressure will drop from where it is set at 800psi right down to nothing. Than after a second it will surge to 1500 and go back to set pressure. This is happening every few hundred feet. We stopped with it pushing down and when the shank...
  2. Planting & Tillage
    I’ve been trying for days to get my 5440 going. It wouldn’t read the speed or shaft 3 sensor. And said “incorrect type connected” I have a service tech out now. He replaced the sensors. Now sensors that had been reading such as fan 1 and fan 2 are not being detected. I’m completely stumped and...
  3. Planting & Tillage
    Running a 7000 series cart and X30 monitor. For some reason I can’t disable tank 6 which is the liquid tank. I can see the enable/disable option in the set up screens but on this tank I can’t select it, the other options on that tab work fine. The enable/disable option works fine for the...
  4. Planting & Tillage
    Has anyone ran lentils or chickpeas thro the stainless steel meter auger on a bourgault tank? How much cracking was there?
  5. Planting & Tillage
    Salford Double disc KHart Double Disc Pillar Single Disc w/seed boot Single Disc Bourgault Pros/Cons to each?
  6. Planting & Tillage
    Looking at upgrading my second drill. Currently run a Bourgault 3320-86 with 10 inch spacing. Thinking of going with a 3320-76 with 12 inch spacing. Was wondering if anyone has seen a yield decrease from going to 12 inch spacing from 10 inch. Also considering running a 2 inch spread to help get...