The Combine Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 36 Results
  1. Claas / Lexion
    Anybody no what to look for here? It was fine at harvest went to move it today and this code came up. Its literally not moved so what happened from then to now is it the rain?
  2. Claas / Lexion
    Just wondering what you guys do for winterization? So goes with out saying blow it off and wash it. Was wondering do you guys pull batteries or just switch the disconnect off, detension belts, or any other things. Just wanna know how far do you guys go?
  3. Headers
    Just wondering what are some better options would be for our 750. We are running very high volume crops and not sure how auger heads work with alot of material. some of the options i see are some cheaper vario heads floating around also a brand new one basically, also some maxflex's, macdon fd70...
  4. Claas / Lexion
    So not sure what’s going on with the coolant in our machine but doesn’t seem normal. So our machine is running at about 92C in the heat of the day. Needle sits almost perfectly in between red and blue sections so not running hot. Rad blown out every day and air filter when needed. Little vacuum...
  5. Claas / Lexion
    Just wondering if you change the faceplate angle further back it stops all the crop from coming out that gap? Does this effect at all how the pickup feeds or should the pickup be ran in the middle position? Also does it effect how it runs on the float mode? And last do you have to drop the...
  6. Claas / Lexion
    dad was looking over the combine this morning and noticed the rotor couplers almost came apart. Didn’t notice it on barley. So we did 118 acre of barley and maybe 20 of canola. Are we doing something wrong and something causing this, is this a common thing or wasn’t it not properly reattached at...
  7. Claas / Lexion
    Quick little 2 in post here. Just wondering if you have to go in cebis anywhere to enable the grainmeter? Our has the normal returns meter but nothing on the side like the grain meter. Also for sensitivity. Do I go in with the same sensitivity into canola as barley or should I turn it down or...
  8. Claas / Lexion
    Just wondering our 750 has the famous lexion window where it getting dirty and can barely see in the hopper after a day a combining. I’ve heard a few possible fix ideas. Was this problem fixed on the new machines? If so do you think it is possible to get the parts of the new machines and make...
  9. Claas / Lexion
    just finished barley yesterday and wanted some advice for canola after seeing how different settings were from the book the sales guy that helped to come out and setup the machine with us the first time. We will be do some pod shatter resistant swathed canola. Our machine has tm6 sieves too if...
  10. Headers
    Just got our claas 750 this year will likely will be our machine for a good amount of years. Just wondering if its worth putting some sort off crop catcher on the pickup. Does it really keep less crap off the feederhouse and save seeds as they advertise? Which one of the ones out there is the...
  11. Claas / Lexion
    Another question from a new lexion owner. Seen in another past about how lexions get so dirty in between windows. Ours had a piece of the water pipe insulation in there and tried to fix it. It just rattled out in an hour and the bottom part just goes into the abyss any suggestions here?
  12. Claas / Lexion
    Since fm or am barely works what is the Bluetooth password in these things 1234 doesn’t want to seem to work and it comes up as car-bt
  13. Claas / Lexion
    Just wondering how tilted forward/back the front plate in the feederhouse should be. Also questions. What sorta settings do you run so the pickup stays a certain height in the ground because I believe it has the capability. Also what is the setting called where you press/hold a button to drop it...
  14. Claas / Lexion
    Anyone know how to remove the screen that comes on every time you start the combine. Decided to move the clock to 2023 instead of 2008 and didn’t realize it would do this. It’s a 2012 750
  15. Claas / Lexion
    H How do I get the bottom door open? Been sitting here for 2 hours trying to open it. I have 3 bolts out and the one on the side out according to the book you only need to take 3 bolts in the front then opening it. Ours will not budge.
  16. Claas / Lexion
    Just got a couple question for ya guys. We got a 750 and had a few questions about crop settings. So ours has 3 concave filler plates in there and talking to the guy who was our salesman’s at ab ag Center if you he said most of the time guys run 1 but with the baked in crops in area where ours...
  17. Claas / Lexion
    So today we went and looked at 3 750's and 2 we really like. I will put some pics of each and the pros and cons and we dont know which of the cons are worse ones to buy. They are both 2012 with 1210 sep hrs 15 difference. Both very close on price too Machine 1. PROS -Special cut II straw...
  18. Claas / Lexion
    I was curious if anyone knows of a grain tank extension for a 2016 Claas 670? Standard this combine comes with a 330 bu hopper. Has anyone every had an issue with a grain tank extension on this combine, like axles not being able to handle it?
  19. Claas / Lexion
    So as mentioned before we are looking at upgrading combines and theres a lexion 750 at a dealership a few hours away and it says rework kit maize to cereals. Anyone know what what have been all switched just the aps grates and maybe the concaves? It must be all setup though it has tm6 top and...
  20. Claas / Lexion
    Hi all, Have been looking at running a Lexion 600 (589 Serial) as a contracting machine and trying to get some input on the hours a machine will work in different crops with 980L tank and the fuel economy I could expect, the machines in our region are Mercedes 502 V8 engines with the Twin Turbo...
1-20 of 36 Results
Top