The Combine Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Case IH
    New to me Case IH 4440, aim command pro,Viper 4. When crossing an angled line if the left side crosses first everything works fine. If the right side crosses first the right 3 sections turn on as sections and the rest of the boom works fine but those first three sections are late. When spraying...
  2. Case IH
    So just trying to put some water through my new to me sprayer to check my rate controller and calibrate the electronic sight gauge. Case ih 4440 with aim command pro and a Viper 4. I can't seem to get the pump to turn on. I tried for awhile and eventually got it on and sprayed out a tank...
  3. Sprayers / Chemicals / Fertilizer
    Hi, I'm installing a electronic sight gauge on my Case Ih 4440 sprayer. I think Accuvolume or the Visio System have a similar type of sensor. Just looking for some pictures or explanations of how other guys have installed the pressure sensor into the tank. Weld in or some type of bulkhead? Thanks!
  4. Sprayers / Chemicals / Fertilizer
    I'm having trouble with one of my height sensors not working on my Case Ih 4430. It will show a height but it appears to be off and it won't engage. I can get the other side to work and I've concluded it's not the sensor as I've swapped the sensors around and they work on the other side...
  5. Sprayers / Chemicals / Fertilizer
    I just got into a case 4430 with a viper 4 monitor, aim, 120s. New to case sprayers I'm wondering what you guys are doing for a rinse between different chemicals on these case sprayers.I also like to put my rinse water through the booms just wondering how I can put the most volume through the...
1-5 of 5 Results
Top