The Combine Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-13 of 13 Results
  1. No Till
    So we are looking at upgrading seeders maybe next year and want to get the ball rolling on what we should be going for. K had another post about air disc drills vs hoe drills and how they pull up wise. Asked my buddy what he though and mentioned going with a 1590 Deere. Reality is they are just...
  2. Planting & Tillage
    So we got a custom seeder to do some canola and barley and wow it does an nice job. So that being said our main concern is that we always have land that is tilled due to manure spreading and getting city waste spread on our land. I’m not sure if we can get away without row cleaners and that...
  3. Planting & Tillage
    So we are considering getting an air drill for this year or next and not sure how big we can go since have read many numbers across the web and wanted some opinions. So we are thinking of going 40ft with like a 250 bushel cart. 95% of our stuff would be cultivated land unless there is the...
  4. Planting & Tillage
    Is it possible to run a john Deere 1910 with another brand iso monitor ex like a timble. I have been told to stay away from the 2600 as they are no longer supported by Deere, and i cant seem to find a 2630. I also cant seem to find a 4240 and all the 4640's have gps activations. I am currently...
  5. Planting & Tillage
    I’ve Got a bourgault 5710 with the mrb series 1. It seems a lot of the shafts are starting to bend and the discs are getting pretty straight with the tractor. Has anyone else had a similar problem?? I try to avoid turning sharp with the seeder in the ground but we have a lot of coulees and...
  6. Planting & Tillage
    G’day I’m looking for any feedback or experiences on paired row openers for our 1870. In particular Atom jet and Dutch openers. Judging by pictures they look like a more slim build compared to OEM. Would this mean they cut through the soil much cleaner with less disturbance and result in a...
  7. Planting & Tillage
    Assistance needed on how to set the rate for wheat on a 2320 flexicoil tank single shoot. It is hooked to a 6 primary run with a 54 disc 7 inch spacing case 8600 double disc tool bar. 30.916 ft drill width. am assuming that cranking out and weighing will help get close- but how do i figure out...
  8. Grain Carts
    Assistance needed on how to set the rate for wheat on a 2320 flexicoil tank single shoot. It is hooked to a 6 primary run with a 54 disc 7 inch spacing case 8600 double disc tool bar. 30.916 ft drill width. am assuming that cranking out and weighing will help get close- but how do i figure out...
  9. Planting & Tillage
    Has anyone ran lentils or chickpeas thro the stainless steel meter auger on a bourgault tank? How much cracking was there?
  10. Planting & Tillage
    I bought some new land over winter. We have always broke up hay land/pasture before seeding a crop into it. I've been reading a lot about seeding directly into sod with no-till and it seems like guys have good luck with it. I never got to spray it out last year because we didn't own it yet. I...
  11. Tractors
    How well will a Claas axion 950 (400 hp approx) fwa pull a 12 metre (40’) seeder bar and 4500 litre air cart in a heavy black soil, no till scenario without duals? No hills. Planting wheat depth ranges from 20-50mm (0.75’’-2’’) Pulses planting from 20mm-150mm (0.75’’-6’’)
  12. Planting & Tillage
    Replacing my worn gauge wheels for next season. Looking for wheels that handle sticky conditions well as we had too much mud buildup this year. At the moment stuck between the Needham ones and the spring ones from RFM NT?
  13. Planting & Tillage
    Grower based in NE Saskatchewan. Looking for someone with experience with a JD 1870 and Canola. We bought a 2012 56' JD 1870 last winter with a 1910 air cart. This spring was the first season we have used it. We are set-up up with single row seed openers. Our wheat crop had really good...
1-13 of 13 Results
Top