Anyone having any trouble with this? It's happend twice now in corn, finally I really tightened it up to keep it from jumping and now have no slack adjustment. Probably not the thing to do. Maybe I need to take a link out? Machine has around 325 sep hrs on it now, 9670 if it matters. Thanks
09 feederhouse jumping center sprocket
Join the discussion
Recommended Reading
-
Pattison foam lake
John DeereFirst dealership closes of the winter ? Saw this on twitter any reason this location is closing? I thought foam lake was a pretty strong farming area- 6
- 506
-
JD 8820 reel speed problem
John DeereI'm currently using a 8820 turbo to harvest a light crop. The reel only turns slow (dial in cab does nothing). Any ideas where to look or if there's a valve I can adjust to get it turning faster.- 8
- 291
-
Central AB, anyone turning crops?
John DeereWhat with all the rain, anyone planning on turning wheat or barley crops to dry faster?- 8
- 2K
-
John Deere 9500 Combine
John DeereWe have a John Deere Combine 9500. from 1996. What is the problem when you switch to to half engine speed nothing happens? it only work on idle and full speed.- 0
- 146
-
Jens Haslund-Thomsen · updated
-
I have a 2005 9660sts combine , the top of bottom seive is wearing on the bottom of top seive
John DeereEverything seems to be tight where they both mount but are wearing on each. It wore the crank assembly on the top completely off ? I wouldn't think they should even touch each other? Did take belt off to see if the back would turn freely even with the top out but turned very hard by hand . DID...- 0
- 138
Join now to ask and comment!