The Combine Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
40 Posts
Discussion Starter · #1 ·
Does anybody have the hitch the goes on the tractor drawbar to hook the mower up. The one with the pin that goes up through the hitch on the mower. If so could i get some measurements so I can fabracate my own. i need the thickness in the flat piece that goes back to the pin that goes through the mower and also the distance from that pin to where the other pin goes through the bracket and the tractor draw bar.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top