The Combine Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
90 Posts
Discussion Starter · #1 ·
If you are talking about the 3" round cover it unscrews after you remove the retainers. Mark the exact position on the housing and cover then count the turns to remove it, very important. It has an "O" ring, nothing under it to lose only a piston. TORQUE
 

·
Registered
Joined
·
101 Posts
i have a 1440 combine the hydrastat started leaking bad lately there is a round piece on the side with some kind of retainer that has three alan head bolts holding it that seems to be were it is leaking i was wondering how to fix it and what might come out win i take the bolts out has anybody ever had this problem also i have a hard time getting the transmission in 2nd gear a little help there will be appreciated to
 
1 - 2 of 2 Posts
Top