The Combine Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
90 Posts
Discussion Starter · #1 ·
If you are talking about the 3" round cover it unscrews after you remove the retainers. Mark the exact position on the housing and cover then count the turns to remove it, very important. It has an "O" ring, nothing under it to lose only a piston. TORQUE
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top