The Combine Forum banner

1460 auger won't swing

2472 Views 2 Replies 3 Participants Last post by  smalls
Head goes up and down, have power to coils. Removed coils andstud ,energized stud and small piston moved. reassembled and loosened hoses to cylinder, no oil flow. What should I check next?
1 - 3 of 3 Posts
Maybe you need to leave the hose to the cylinder loose to allow the "Air out of the hose" Otherwise I know that around the elbow every grease fitting NEEDS to accept grease to allow a smooth operation for the unload auger......My thoughts for now. Hammer
We have a 1460 and there was a brass bushing in thee elbow that wore out also we have a 1480 that it wont swing out very good with out greasing it when you are swinging it in and out
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top