The Combine Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
We have a 1640 combine, when it is windy the rotary air screen spins slower and causes the alarm to buzz. It only happens when we are combining torwards the south and the wind from the west slows the screen. We have replaced the sensor and it did not help. The radiator seems to be clean. We know the green wire in the cab behind the monitor is the wire that goes to the sensor but if you disconect the wire it opens the circut and the alarm goes on. Any suggestions?
 

· Registered
Joined
·
2 Posts
Discussion Starter · #5 ·
Thanks for all of your help, Dad replaced all the brushes and the sensor a year ago. I will check the bearing again to make sure it is still good. We always monitor the temp and have not had any issues there. we were hoping to put a switch on the green wire so if it was windy and going towards the sout we could turn that off and none of the other alarms.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top