The Combine Forum banner

1680 Feeder House

1554 Views 1 Reply 2 Participants Last post by  kthwht1680
My 1680 is making a grunting sound and vibrates the combine when i raise and lower it. Does anyone have any ideas? It doesnt affect the performance of the machine just cant seem to track the problem down.
1 - 2 of 2 Posts
Could be a bent feeder house pivot. Does your 1680 have the bracket welded to the feeder house and to the pivot? I really can't think of anything else that would cause the noise.

I guess i would be pulling the feeder house off and see if there is anything bent or out of line on it.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top