The Combine Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter · #1 ·
i have a 1990 model 1680. when shellin corn we seem to be loosing to much corn over the rotor. i've don eeverything i know to do as well as what the book says. anyone have any suggestions? also gettin little bits of cob in the sample, but the cobs coming out the back of the machine aren't all busted up. thanks
 

·
Registered
Joined
·
117 Posts
Are your concaves shagging and plugging? especially on the hanger side (right side) We are selling a lot of round bar concaves inserting them in the 2nd stage this helps a lot if this indeed is your problem the corn is very wet so far, let me know
 

·
Registered
Joined
·
2 Posts
When that happens to me, I usually open the con-caves alittle to give the corn more time in the machine. Thanks for your advise on my auger. Will look into it.
 
1 - 3 of 3 Posts
Top