The Combine Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
24 Posts
Discussion Starter · #1 ·
Field Tracker is still too sensitive even with control knob turned all the way down. Won't level when raised.

Do I need to adjust the screw on the console?
 

·
Registered
Joined
·
65 Posts
Re: 1688 Field Tracker to sensitive and won't leve

Jim,
I had a FT installed on a 20' head in 2008. The mech. told me that the Pots need to be OHMed within 200 ohms on each side. If this is not checked it will have a hard time to "find itself" when in operation. h.
 

·
Registered
Joined
·
203 Posts
Re: 1688 Field Tracker to sensitive and won't leve

Our field tracker wouldn't level on our 2588 today. Changed the potentiometer on the front left side of the feederhouse and that solved that.
 
1 - 3 of 3 Posts
Top