Hi
Replace the 3 wire engine oil pressure switch on the engine.
Amax
Replace the 3 wire engine oil pressure switch on the engine.
Amax
1688 hydraulic problem
I'll be thrashing along and then I lose the ability to raise and lower the header and fold/unfold my unloading auger. I still have steering and the only way to regain control of the other functions is to idle down and re-start everything. We've replaced filters and checked solenoids but we think it may be a priority valve problem. Any ideas? Thanks
1 - 5 of 5 Posts
Amax,
So it isn't really a hydraulic problem, it's just killing the hydraulics because it's reading the oil pressure wrong?
So it isn't really a hydraulic problem, it's just killing the hydraulics because it's reading the oil pressure wrong?
Yep
Engine oil pressure sensor provides ground for relay that turns on electo/hydralic functions.
Sorry about spelling.Seen problem many times.Sometimes you may let the engine idle for a while and things will start working again.
Amax
Amax
Engine oil pressure sensor provides ground for relay that turns on electo/hydralic functions.
Sorry about spelling.Seen problem many times.Sometimes you may let the engine idle for a while and things will start working again.
Amax
Amax
I'll be thrashing along and then I lose the ability to raise and lower the header and fold/unfold my unloading auger. I still have steering and the only way to regain control of the other functions is to idle down and re-start everything. We've replaced filters and checked solenoids but we think it may be a priority valve problem. Any ideas? Thanks
1 - 5 of 5 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
The Combine Forum
A forum community dedicated to all combine owners and enthusiasts. Come join the discussion about specifications, accessories, troubleshooting, maintenance, and more!
Full Forum Listing
Explore Our Forums
