[cih2388x2]

Had this happen on my 8010 turns out it had a broken wire to the solenoid on the hydraulic valve that is on the rear axle. the routing of the wire is to the self leveling sieve and it wiggles the wire till it breaks. Check real close where the wire enters the solenoid. Mine had the exact symptoms you describe, feels like the two speed but it actually is the mud hog main solenoid

 

[ricecutter]

Has anyone else had trouble with the 2 speed mud hog shifting up and down? Almost seems like it is just shifting up into the high speed and right back down to low speed. It does this constantly in the high speed, never when running in the low speed. Thought it might be a relay or something. Thanks in advance.

 

[ricecutter]

Just curious, did your's do it all the time when the mud hog was engaged, high or low, or just in high like mine?