The Combine Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I have 2 John Deere 9600 and want to install 2-way radios in them so they can communicate in the field. I have never installed a 2-way before, any tips? Thanks curtd
 

·
Premium Member
Joined
·
256 Posts
There is a diagram in your operators manual that shows where the radio mount can be installed. I believe it's under CB radio installation.

Mount the antennae as far back as you can, preferably on the left hand rear corner of the cab or on the left hand front corner of the grain tank. If you mount it too close to the radio it can stop the header when you key the mike.

MS
 

·
Registered
Joined
·
2 Posts
Discussion Starter #4
Thanks Dano and Michaelshawn, I have already intsalled one radio and it works great, Thanks again
 
1 - 4 of 4 Posts
Top