The Combine Forum banner

2000 series boughaut metering issus

1329 Views 6 Replies 5 Participants Last post by  skgrain
Hi guys I have a 2130 tank and I have a heck of a time getting accurate rate on small seeds. Canola is all over the place but always been plus minus 1 pound of desired rate. I lived with that but with innoculant it's dosnt meter really at all. New lid new seal. No leaks on tank I can detect. I'm guessing its a pressure issue. Dual pressurization valve is set correctly. Any thoughts?
1 - 2 of 7 Posts
Make sure the pressurization valve isn't plugged up. Had that happen on ours caused all kinds of weird trouble with rates. We never dual shooted with it so just took insides out of valve and was good from then on.
If your tank pressurization hose is working it shouldn't have any effect and in theory shouldn't have any air coming back up through the auger only time that should happen is if your tank isn't being pressurized properly. You should hear tank pop not long after you turn fan on indicating that it is working properly.
1 - 2 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.