The Combine Forum banner
1 - 1 of 1 Posts

· Registered
1 Posts
Discussion Starter · #1 ·
Just getting started in beans with our new 2020 35' platform, and are having problems with the header pushing material from underneath the head. Did not seem to have this problem on our previous 2020 30'. I have tried adjusting the feeder house angle from 15 to 17 degrees with no success. Any suggestions on what else to look for would be greatly appreciated. Thanks
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.