[schottfarms]

Hi. I have to reseed some canola. I picked the same setting I used previously and it have me 5 lb per ac. I was applying fert at same time. Now I'm applying just seed and my rate is all over. Way to low and even if I go to smaller sprockets it still is too low. I used a 42 tooth before. and now I'm on 35 and still not good should i throw seed in front tank and take off drive chain or to I adjust dual pressurization valve? Thank you

 

[crtrucker]

First off check your TKW of your seed lots. I seeded 3 different lots this year and sprocket selection was completely different, as high as 42 tooth for 5.16 pounds to 25 tooth for 6 pounds. Nothing to do with less product on my experience, if your tanks are pressurized you should be okay. I'd drop your fan speed though.

 

[schottfarms]

Great thanks

 

[kevlar]

I cant remember for sure but I believe there is a pipe that goes between the two tanks on the inside just below the lids. If you are just using the one tank there is a cap you screw on this pipe, I believe our 2155tank was set up like this.

 

[holoj]

If you dont have the valve he is speaking of definately put some product in the front tank because the tank wont preasurize without product in it. the 2155 i had never had the valve.