The Combine Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
247 Posts
Discussion Starter · #1 ·
Need to replace it. Case wants $488 cdn for the sprcket that the starter motor engages to. $700 or $800 something for the starter motor. Is there an aftermarket supplier of these two items? Can the gear on the starter motor be replaced seperately? Thanks.
 

·
Registered
Joined
·
193 Posts
The drive on the starter motor can be replaced and it is A186235 and sells for about $136 US. You can also get a rebuilt motor 245927C93R which sells for about $427 US.
 

·
Registered
Joined
·
211 Posts
Yeah, that large ring gear sprocket isn't cheap. If it is not chewed up too bad I have cleaned a lot of them up with a die grinder and not had any issue, but maybe the one you have is past that.
 

·
Registered
Joined
·
37 Posts
You can drive the ring gear off of the sprocket if they are chewed up, and install it the opposite way to get by for a while as well, the teeth usually only wear off one side.
 
1 - 5 of 5 Posts
Top