The Combine Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
31 Posts
Discussion Starter #1
I'm putting a 21 series handle in my late model 1460. For those of you that have done this how do you get the auger and reel switches to work? The factory switches are 4 wire but the 21 series switches won't work the way I thought. I need to energize 2 wires like the old switch but the new ones only energize one wire? Can it be done with relays or is there a easier way?
 

·
Registered
Joined
·
99 Posts
i saw this handle on a 1688 today, i have no answer to your questions but was wondering if you have ever seen these sure grip handles before? do a search there is some older posts on this topic on this site i seen a while back. Good luck and be sure to let know how it works out.
 

·
Registered
Joined
·
90 Posts
I think relays would be the best, you may also need diodes in the wires from the relays to the master valve to prevent back feed. There is a caseih part # for the diodes, they were used with field tracker for that purpose.
 
1 - 3 of 3 Posts
Top