The Combine Forum banner

2188 hp

3K views 5 replies 3 participants last post by  cowgirlchaser 
#1 ·
Does a person need to remove the fuel pump and take it to a shop to set the fuel delivery and any other settings to turn it up? I run a 30ft head in beans and a 12 row 22" head in corn, the temp guage always runs in the bottom of the green operating range.

Just checking to see if any of you have turned up their 2188's, and if there was any problems with turning it up and how hard it was to do?
 
Discussion starter · #5 ·
Big A, you don't think EGT's are a problem? Before I did anything to my truck everyone said to put EGT gauge on so not to melt anything. I do agree the wastegate increasing boost will help the EGT with more flow, can that turbo even put out more than 45 PSI? Will the water temp gauge let my know enough about the engine to keep the temps safe?

Just a few questions to make sure everything stays running.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top