The Combine Forum banner


1297 Views 3 Replies 4 Participants Last post by  new1680
Just got a used 2188, while looking over the straw chopper I found it doesn't have a concave blade assembly, is it necessary to have one.
1 - 1 of 4 Posts
If would suggest putting the balde assembly in it to get a finer chop on the straw. A couple times I have gotten in a hurry & forgot to push the knife assembly up when switching back from corn & there was a noticeable difference IMO. Especially if the stems are green.

You should be able to pick one up at a salvage yard but I would recomend buying the external knife adjuster kit, it will have one in it . We put one in the 2366 we use to have & it was worth every penny. Sure beats crawling up inside the combine, laying on your back & having all that crap fall in your face.
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.