The Combine Forum banner
1 - 6 of 6 Posts

· Registered
Joined
·
110 Posts
Discussion Starter · #1 ·
We have a new to us massy 220 swather and cannot get it started. I think I have everything in neutral but the green light won't come on. Which will not let it engage the starter. All fuses are good. Has anyone had this problem? Where do I start looking?

TIA
 

· Registered
Joined
·
81 Posts
park brake on, hydro lever in neutral, header engage all the way down, then slowly spin steering spin steering till green light shows. The one that catches most new people is the header engage. wiggle everything first then start checking switches for faults
 

· Registered
Joined
·
1,024 Posts
Oh the joys of getting a 220 to let you start it is like trying to get misses in the mood. Doesn't hurt to check wires on those safety switches and that the switches are working. The steering wheel and hydro stick switch can be chronic problem.
 

· Registered
Joined
·
110 Posts
Discussion Starter · #6 ·
I found them. Got it started. The header engagement switch isn't getting enough contact so I'll have to try and move it closer. Thanks for all the responses greatly appreciated.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top