The Combine Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
111 Posts
From what I have read here & on other forums & after discusing chopping head with our CIH dealer I would think you would want to go with at least a 6088 & preferably with a 7088 if you're going to to an 8 row chopping head.

Dealer said a 12 row chpping head required an additional 80 hp over a conventional 12 row head.. Based on that a 8 row would require roughly 50-55 additional hp.

Not aure what forumn but someone mentioned they were running a 8120 with 12 row chopper & it was all the combine wanted in 200 bpa corn.

JMO
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top