The Combine Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,073 Posts
I ended up putting a 3/8" rubber fuel hose over the cables at the back of the combine where it makes a loop and goes to the sieves . Just taped it all up with electrical tape and had put the hose starting just before the cable clamp on the combine to stop it from moving as the wires were wearing from the movement . I had just cut a slit in the hose to get the wires in then taped over the hose .
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top