The Combine Forum banner
1 - 11 of 11 Posts

·
Registered
Joined
·
23 Posts
Discussion Starter · #1 ·
I just bought a 2001 2388 and am having issues with the afs monitor. It will come on and say no card found do you want to continue, press yes and it will continue and let you begin to set it up then the screen goes blank and a red led comes on in the bottom left corner of the border. You can cut the switch off and back on but it will do the same thing over again. Any ideas? Thanks in advance.
 

·
Registered
Joined
·
560 Posts
thanks. if anyone knows will the pro 600 work in the same mount or is it a whole new install?
To put a Pro 600 where a Universal Display or Display Plus is installed, you need an adapter harness. A new bracket is recommended but not technically required. The 600 will fit the old bracket, but it will be a tight squeeze against the headliner. If you can't find a 600 and decide to go with a 700, a new bracket is required.

To put a Pro 600 where a black box is installed, you need several additional components and harnesses.
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top