The Combine Forum banner

2388 moisture sensor out of range

397 Views 2 Replies 2 Participants Last post by  Willo
2388 moisture sensor has a fault "out of range" check switch. Anyone know what to look for.
1 - 1 of 3 Posts
It probably means that the voltage reading from the moisture sensor is out of the specified range. Check what voltage you are getting in the displays diagnostics. To find the problem you have to make sure that the sensor is getting power and is outputting the proper voltage and that it is making its way back to the ecm. If any of these things is out it could cause this code.
1 - 1 of 3 Posts