[nwokie]

I've got a 2388, with specialty rotor. Right now with my settings I am running way to much tailings. Rotor speed 470, fan 1080, front 1/4, middle 1/2, back 5/8, bottom sieve 3/8. Only able to go 3 - 3.5mph and not able to keep my rotor full (50 bushel milo).

 

[farminflyboy]

Is the milo really light, we had some replant that was very light and was causing alot of return. Probably just need to oppen up your top-middle and bottom sieve so that it goes in the tank.

 

[nwokie]

The milo is not real thick (double crop). What about that front sieve on top? By the way I have my concave open to 3

 

[nwokie]

Thanks for the help, bottom sieve adjustment did the trick

 

[farminflyboy]

good deal. Should probably be driving atleast 6mph in 50 bpa milo, we are usually running out of hydro if the milo is less then 80bpa.