The Combine Forum banner

2577 with a 36' draper

1216 Views 1 Reply 2 Participants Last post by  caseihaxialflow
Does anone out there run a 2577 with a 36' flex draper, and what do you think?
1 - 2 of 2 Posts
Plenty of people run them here. Not an issue. It's pretty much a pre exclusive 2388 and there are a lot of people running a 36' on early model 88's. The only thing that may hinder it is if you are in hilly country or high yielding crops where you might run out of stick, but for the most part they work quite well. A third lift ram and auger extension compliment the deal.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.