The Combine Forum banner

1 - 2 of 2 Posts

·
Premium Member
Joined
·
1,969 Posts
Discussion Starter #1
If any JD techs are watching - this is where your input is appreciated. Can I put a 2 speed 4WD from a 50 series onto a 70 series? Is there anything that I may need on the 70? Let's presume all the wiring is in place & it's just a matter of changing axles, hyd hoses, valves & putting a switch in the console.
Thanks for your input.
 

·
Registered
Joined
·
400 Posts
Re: 50-70 4WD

if it is the 2 speed on the 50 series, you will want to make sure that it has the 5 bolt axle flange


--------------------------------------------------------------------------------


60 Series combine for a 70 Series combine and would like to move the four-wheel drive motors to the 70 Series machine.


Four-wheel drive bundles, BH90115 and BH90116, can be transferred to 70 Series machines with a few additional parts.

Quantity
Part Number
Description

1
AH220122
70 Series 4WD Harness

1
AH226745
Case drain hose (Replaces AH153932)

1
AH225307
Forward pressure hydro hose (9670–9870 Only)
 
1 - 2 of 2 Posts
Top