[coadman]

What sensitivity settings should a person start out with where the grain loss cones are on the display? New to me combine, so unsure where they are set at from previous owner. Cutting thin, 20 bu + wheat and rotor loss sometimes appears in lower half of cone, but sometimes not. Cone for Sieves, I think appeared full at one time, but mostly nothing in there. Started with initial crop settings recs from book, 1050 Rotor, 1050 fan, 10/6 on upper/lower sieves(moved them around a bit since then). Doing an excellent job of cleaning, very good sample. Tired opening top sieve of wider, noticed more trash in bin, but nothing changed in cone display. Thanks for any replies.
Jim

 

[scott]

When you start machine are cones in the green, have seen sensors stick, cone will be in the red, what monitor are use using? do you have a manual for machine, I don't know if there is a adjustment for these sensors, with a lite wheat crop, gonna have to push harder on the hydro handle to keep machine full, Scott.

 

[coadman]

Pro600 monitor, plus am running 5.8-6mph, not used to cutting wheat that fast!(lol) I agree, probably need to go faster to keep header full. thanks,
Jim

 

[farminflyboy]

How big of header. What is the concave setting? Is the wheat threshing easy? I think the rotor speed us too high id start at 850-900 for 20 bu/acre.