The Combine Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
I need advice for a new combine (no hill only flat land).. actually have a 2388.



Are the bushing in the midrange 140 serie combine with the new Xflow cleaning system really beefed up ?


Is the Xflow cleaning system reliable or it's better to stay with the old fashionned cleaning system with the pretzel cast iron pitman arm support ???


What would you do ?

Thanks
 

·
Registered
Joined
·
95 Posts
We are running a 7140 with the xflow cleaning system for 2 seasons now. No issues, and all the bushings are still good. We are working in very steep Terrain and hillsides in Central Europe in Austria! We had a 2388 several years ago and had to change the bushings every Season.
Hope this helps!
 

·
Registered
Joined
·
3 Posts
Discussion Starter #3
We are running a 7140 with the xflow cleaning system for 2 seasons now. No issues, and all the bushings are still good. We are working in very steep Terrain and hillsides in Central Europe in Austria! We had a 2388 several years ago and had to change the bushings every Season.
Hope this helps!
Thanks for the answer.
I'm from Europe too (France)
I Wonder if the x-flow cleaning system will be reliable.
Are you harvesting corn ? How Is the capacity compared to your old 2388 ?
 
1 - 3 of 3 Posts
Top