The Combine Forum banner

635f header poor feeding.

8386 Views 13 Replies 8 Participants Last post by  jdgreen
We are running a 2013 635f header with air reel and we're doing some field peas. Sometimes the crop will get hung up on the end of the table. The last foot or two. It'll just sit there and build up. No matter where I position the reel, the air, or set my reel speed or travel speed at it'll still do this. Occasionally it'll do it towards the center of the table too. The table is clean on top and underneath. Any ideas on how to fix this?
1 - 3 of 14 Posts
Yeah I unhooked the air the other day just to keep the dust down. Never affected feeding. Head is starting to get shined up. It's an intermittent issue. If it was consistent it would be easier to troubleshoot. I've put the reel in every position. Never touched the fingers. We do have contour master. The peas are standing up.
1 - 3 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.