The Combine Forum banner

635f header poor feeding.

8379 Views 13 Replies 8 Participants Last post by  jdgreen
We are running a 2013 635f header with air reel and we're doing some field peas. Sometimes the crop will get hung up on the end of the table. The last foot or two. It'll just sit there and build up. No matter where I position the reel, the air, or set my reel speed or travel speed at it'll still do this. Occasionally it'll do it towards the center of the table too. The table is clean on top and underneath. Any ideas on how to fix this?
1 - 1 of 14 Posts
Most guys I know either swath or swath ahead of the combine so they can use a pickup header, easier to feed the combine.

Another pass I know is a pain and expense, but nothing is worse than flat as a pancake lodged peas. Though pea beaver huts are frustrating as well.... as usual in farming there is no easy way.... :)
1 - 1 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.